Menu
Online Budget

Produtos /Spare Parts /Impellers

Opened Impeller High Pressure Pump

Opened Impeller High Pressure Pump

Rotors made of sheet steel and welded in an opened modeling.   This impeller model when coupled to a high pressure pump performs well in water movement. With less end pressure compared to the closed rotor, the open rotor aims to work with a slightly larger volume of water, allowing water with up to 10% solids in the 0.5mm particle limit.   When admitting solids to suction, be aware that abrasion on internal components will increase and equipment life will also decrease.
Closed Impeller High Pressure Pump

Closed Impeller High Pressure Pump

Rotors made of sheet steel and welded in closed modeling.   This impeller model when coupled to a high pressure pump performs well in water movement. With higher delivery pressure than the opened rotor, the closed rotor aims to work with a slightly smaller volume of water, delivering higher pressurization on water lines that do not allow solids, only clean water.   By admitting only clean water, the durability of the internal components is high, prolonging the equipment's use time without changing parts.
Cast Steel Impellers

Cast Steel Impellers

Opened 4 blades impeller made of cast steel, for dredge pumps from 3 til 8 inches.    Part with good support for handling liquid and solid dredging mixtures. It has considerable resistance to organic materials and general liquid movement. When handling abrasive materials such as sand and mud, consider the abrasiveness for natural wear of the product. Part without guarantee of durability due to the different materials that can be admitted by the pump. Recommendation to not use this part on chemicals with possible corrosive agents.   Consult our technical department for assembly dimensions.     Part also available with 3 blades version. Check availability.
Impellers for Dredging Pumps

Impellers for Dredging Pumps

Opened 4 blades impeller made of welded steel plate, for dredge pumps from 3 til 8 inches. Good-thickness disc-reinforced weld blades to prevent warping.   Part with good support for handling liquid and solid dredging mixtures. It has considerable resistance to organic materials and general liquid movement. When handling abrasive materials such as sand and mud, consider the abrasiveness for natural wear of the product. Part without guarantee of durability due to the different materials that can be admitted by the pump. Recommendation to not use this part on chemicals with possible corrosive agents.   Consult our technical department for assembly dimensions.     Part also available with 3 blades version. Check availability.