Download our full catalog
Products/Centrifugal Concentrators/BM-15 Concentrator
Brazmix Centrifugal Concentrator
More Technology for Mining
Centrifugal concentrator for the processing of ore from hammer or ball mills.
|CENTRIFUGAL CONCENTRATOR BRAZMIX BM-15|
|Best Efficiency Capacity||12 Ton/h|
|Maximum Processing Capacity||15 Ton/h|
|Input Material Density||10% until 65% of Solid|
|Maximum Input Particle Size||Between 1 and 2 mm ( 18 and 10 mesh)|
|Minimum Particle of Concentration Observed||170 to 200 mesh|
|Observed Recovery Rate||Between 98% and 99%|
|Cycle time||5 to 7 hrs|
|Concentration Capacity per Cycle||5 to 8 KG|
|Approximate G-force of Operation||150 G's (50 Hz)|
|Approximate Water Consumption||5 to 7 m³/h|
|Operation Water Pressure||4 to 7 PSI|
|Coupled Motorization||5 HP / 230-380|
|Operational Rotation||315 RPM|
|Dimensions||1700x1400x1500 mm (LxWxH)|
This equipment goes into the gold mining process to add technology and agility in everyday life. Designed to work in line with hammer and / or ball mills, the centrifugal concentrator receives the material that was milled in the previous step mixed with water to perform a centrifugal washing.
Receiving the milled material, the concentrator acts on the separation and despise of part of the inserted material that has low specific weight (gravel, slurry and sand), leaving a gold-enriched concentrate for the next phase of finishing. It is important to note that the processing of this equipment takes place by the centrifugal force of the rotor and the injection of water in the process. The result at the end of a wash cycle is obtained by the higher density that gold and other metals have in relation to mud and sand.
The Brazmix Centrifugal Concentrator works efficiently and with very little need for component wear maintenance. The equipment works in cycles of 5 to 7 hours (recommended) where it accumulates the denser material that has been processed, so that it is turned off and cleaned, with the removal of the accumulated material for finishing. After cleaning, the concentrator is ready for another cycle of equal duration, observing the needs of shaft lubrication, belt adjustment and water filter cleaning.
The concentrated material that results from the work of this equipment will have a high concentration of gold and other metals of similar density (if the processed material has such minerals that allow the capture), being ready for finalization by the way that the client deems most appropriate for your application. Recalling that Brazmix Mining Equipment is totally against the use of mercury in the gold extraction process, the next phase for the capture of gold-dust is in charge of equipment such as the "Vibrating or Finishing Tables", which separate the gold from other metals and wastes from the concentrate.
Crusher Mill BM-3
Brazmix hammer mills line. Robust equipment to ensure efficient work with various materials. Application: Suitable for crushing stones of any kind, as long as it is permissible within [...]
Molds made of steel with specific machining to create spindles for casting molten metal. Available options: - 4 Divisions: 50 gr / 100gr / 250gr / 500gr - [...]
Dredging Pump 6" Diamond 500
Diamond 500 Dredging Pump Series - Brazmix Exclusivity; Equipment version melted for more resistance to abrasion of solids and with greater durability than conventional Brazmix pumps. Up to 30% more [...]